We do not sell replacement O-rings separately, but medium-weight dental bands will function just as well. You can find these at any drugstore.

No, replacement blades are not available.

No, the Quiet Crank only works on bow models that have the plus-shaped hole in the butt stock.

The minimum is 380 total grains. This includes the combined weight of the bolt and the point.

Available replacement parts are sold on our website. This includes arrow retainer springs, strings and cables, cable slides, foot stirrups, foregrips, pistol grips, and scopes.

We do not recommend leaving your crossbow cocked longer than one hunting session. For example, if you are hunting in the morning, we recommend firing the crossbow and re-cocking before an evening hunt (4-6 hours maximum).

Before inserting the winch into the crossbow, ensure your bow is in the FIRE position.  Mount the winch in the stock by inserting the + mounting rod into the corresponding slot at the rear of the stock.  Once mounted, move the switch on the winch to the “Unlock” position to disengage the cocking system.   NOTE: You must hold the switch in the “Unlock” position to pull the rope out of the pulley.  Once you release the switch, it will default to the “Lock” position and you can begin reeling in the rope.

Yes. The Crank will hold position once it is stopped.

No, you want to remove the Quiet Crank from your bow before firing. The Crank does not snap into place and could fall out when your bow is held horizontally.

No, we do not sell the rope for either item as a replacement part.

No, this is not a part that is sold separately.

https://www.feradyne.com/product/the-nub/No. The only way to disengage your bow is to fire it. We make a de-cocking tip called 

No, the nocks are not glued in. They are pressure-fit nocks.

When storing your crossbow for extended periods of time, keep it in a temperature-controlled environment to avoid rusting and string/cable deterioration. There is no need to let down the tension on your limbs during the off-season.

We recommend using a paper towel and denatured alcohol. Be sure to use paper towels that have no additives, such as lotion. We do not recommend using any other harsh chemicals or acetone.

If you are shooting a crossbow that is manufactured by Carbon Express, you can use any of our crossbolts. If you are shooting a non-Carbon Express crossbow, we recommend calling the bow manufacturer to verify the minimum bolt weight recommended for that model bow so you choose the right bolt for your crossbow and the correct nock (half-moon, flat, etc.).

We recommend doing a flex test after every shoot to ensure there has been no damage to your bolts.  For more information on how to perform this test as well as additional safety instructions, visit   .  WARNING: Never shoot a cracked or damaged shaft.